Assessing the ecological and health risks associated with heavy metal pollution levels in sediments of Big Giftun and Abu Minqar Islands, East Hurghada, Red Sea, Egypt.

This study assessed pollution levels, ecological and health risk, and spatial distribution of eight heavy metals in sediments of Big Giftun and Abu Minqar Islands, Red Sea, Egypt. Iron (Fe) and manganese (Mn) had the highest contents in both island sediments, while cobalt (Co) in Big Giftun and cadmium (Cd) in Abu Mingar had the lowest values. The obtained PCA data exhibited positively significant loadings of Cd, Co, copper (Cu), nickel (Ni), and zinc (Zn) with 51.03 % of data variance in Big Giftun, and lead (Pb), Cu, Mn, Ni, Zn, and Fe (37.7 %) in Abu Minqar sediments. The contamination factor (CF) showed low contamination for all metals, except cadmium; Cd (moderate). The geo-accumulation index (Igeo) values showed uncontaminated (Cd, Co), moderately (Cu), extremely contaminated (Fe, Mn) (Igeo > 5) in Big Giftun, and uncontaminated (Cd), moderately to strongly contaminated (Cu, Ni), and extremely contaminated (Fe, Mn, and Zn) in Abu Minqar sediments. The pollution load index (PLI) values indicated baseline level of contamination (PLI <1), and degree of contamination (DC) indicated low degree of contamination (DC < n) in all sediments. Nemerow pollution index (NPI) showed unpolluted sediments in Abu Minqar (NPI ≤1) and slight pollution (1 < NPI ≤2) in Big Giftun. Cd showed moderate potential ecological risk (40 ≤ Eri < 80) in Big Giftun sediments. Potential ecological risk index (PERI) indicated low risk sediments (PERI <150). Mean effects range median quotient (MERMQ) indicated low-priority risk of toxicity (MERMQ ≤0.1), and toxic risk index (TRI) showed no toxic risk in all sediments (TRI <5). The modified hazard quotient (mHQ) indicated very low severity of contamination (mHQ <0.5). The hazard quotient (HQ) levels of all metals were below the safe value (HQ <1). The hazard index (HI) levels indicated that no chronic risks occur (HI <1). The total cancer risk (TCR) for all metals were below the safe level (1 × 10-4) of the United States Environmental Protection Agency (U.S. EPA) guidelines.

Dolphin-shaped island: Exploring the natural resources and radiological hazards of Wadi El Gemal Island.

The objective of this study is to assess the natural resources and radiological risks of Wadi El Gemal Island by examining its topography, mineralogy, geochemistry, and radioactive distributions. This island, which is situated at the outlet of Wadi El Gemal in Egypt's southeastern Desert, has a unique shape resembling a dolphin based on Landsat imagery. It's a part of the Wadi El Gemal-Hamata Protectorate and is notable for its diverse environmental, geological, economic, and archeological features, including recent reefs, sandy deposits, Quaternary carbonate sediments, and mangroves. The main natural resources on the island are fauna, mangrove forests, and flora. Samples collected from the island were analyzed using a NaI detector to measure the concentrations of radionuclides such as 238U, 232Th, 226Ra, and 40K, which were found to be within acceptable levels according to UNSCAR guidelines. The radionuclide 238U, 232Th, 226Ra, and 40K activity concentrations of the collected samples were 32.55 ± 9, 12.63 ± 4, 12.49 ± 4, and 325 ± 34 Bq/kg, respectively. Regarding radiological hazard indices, the values of absorbed gamma dose rate (36.06 ± 5.42 nGy/h), radium equivalent activity (73.88 ± 14.4 Bq/kg), annual effective dose indoor (0.18 ± 0.03 mSv/y) and outdoor (0.04 ± 0.01 mSv/y), internal (0.29 ± 0.05) and external (0.2 ± 0.03) indices, and excess lifetime cancer index (0.15 ± 0.05 × 10-3).This is suggest that there is no significant risk associated with these sediments.

Plant and Microbial Approaches as Green Methods for the Synthesis of Nanomaterials: Synthesis, Applications, and Future Perspectives.

The unique biological and physicochemical characteristics of biogenic (green-synthesized) nanomaterials (NMs) have attracted significant interest in different fields, with applications in the agrochemical, food, medication delivery, cosmetics, cellular imaging, and biomedical industries. To synthesize biogenic nanomaterials, green synthesis techniques use microorganisms, plant extracts, or proteins as bio-capping and bio-reducing agents and their role as bio-nanofactories for material synthesis at the nanoscale size. Green chemistry is environmentally benign, biocompatible, nontoxic, and economically effective. By taking into account the findings from recent investigations, we shed light on the most recent developments in the green synthesis of nanomaterials using different types of microbes and plants. Additionally, we cover different applications of green-synthesized nanomaterials in the food and textile industries, water treatment, and biomedical applications. Furthermore, we discuss the future perspectives of the green synthesis of nanomaterials to advance their production and applications.

Synthesis, Characterization and Application of Polypyrrole Functionalized Nanocellulose for the Removal of Cr(VI) from Aqueous Solution.

Heavy metals are toxic substances that pose a real danger to humans and organisms, even at low concentration. Therefore, there is an urgent need to remove heavy metals. Herein, the nanocellulose (NC) was synthesized by the hydrolysis of cellulose using sulfuric acid, and then functionalized using polypyrrole (ppy) through a polymerization reaction to produce polypyrrole/nanocellulose (ppy/NC) nanocomposite. The synthesized nanocomposite was characterized using familiar techniques including XRD, FT-IR, SEM, TEM, and TGA. The obtained results showed a well-constructed nanocomposite with excellent thermal stability in the nano-sized scale. The adsorption experiments showed that the ppy/NC nanocomposite was able to adsorb hexavalent chromium (Cr(VI)). The optimum pH for the removal of the heavy metal was pH 2. The interfering ions showed minor effect on the adsorption of Cr(VI) resulted from the competition between ions for the adsorption sites. The adsorption kinetics were studied using pseudo 1st order and pseudo 2nd order models indicating that the pseudo second order model showed the best fit to the experimental data, signifying that the adsorption process is controlled by the chemisorption mechanism. Additionally, the nanocomposite showed a maximum adsorption capacity of 560 mg/g according to Langmuir isotherm. The study of the removal mechanism showed that Cr(VI) ions were removed via the reduction of high toxic Cr(VI) to lower toxic Cr(III) and the electrostatic attraction between protonated ppy and Cr(VI). Interestingly, the ppy/NC nanocomposite was reused for Cr(VI) uptake up to six cycles showing excellent regeneration results. Subsequently, Cr(VI) ions can be effectively removed from aqueous solution using the synthesized nanocomposite as reusable and cost-effective adsorbent.

Magnetic Nitrogen-Doped Porous Carbon Nanocomposite for Pb(II) Adsorption from Aqueous Solution.

We report in the present study the in situ formation of magnetic nanoparticles (Fe3O4 or Fe) within porous N-doped carbon (Fe3O4/N@C) via simple impregnation, polymerization, and calcination sequentially. The synthesized nanocomposite structural properties were investigated using different techniques showing its good construction. The formed nanocomposite showed a saturation magnetization (Ms) of 23.0 emu g-1 due to the implanted magnetic nanoparticles and high surface area from the porous N-doped carbon. The nanocomposite was formed as graphite-type layers. The well-synthesized nanocomposite showed a high adsorption affinity toward Pb2+ toxic ions. The nanosorbent showed a maximum adsorption capacity of 250.0 mg/g toward the Pb2+ metallic ions at pH of 5.5, initial Pb2+ concentration of 180.0 mg/L, and room temperature. Due to its superparamagnetic characteristics, an external magnet was used for the fast separation of the nanocomposite. This enabled the study of the nanocomposite reusability toward Pb2+ ions, showing good chemical stability even after six cycles. Subsequently, Fe3O4/N@C nanocomposite was shown to have excellent efficiency for the removal of toxic Pb2+ ions from water.

Synthesis of Polymer-Based Magnetic Nanocomposite for Multi-Pollutants Removal from Water.

A magnetic polymer-based nanocomposite was fabricated by the modification of an Fe3O4/SiO2 magnetic composite with polypyrrole (PPy) via co-precipitation polymerization to form PPy/Fe3O4/SiO2 for the removal of Congo red dye (CR) and hexavalent chromium Cr(VI) ions from water. The nanocomposite was characterized using various techniques including X-ray diffraction (XRD), Fourier transform infrared spectroscopy (FTIR), scanning electron microscope (SEM), vibration sample magnetometer, and thermogravimetric analysis (TGA). The results confirm the successful fabrication of the nanocomposite in the size of nanometers. The effect of different conditions such as the contact time, adsorbent dosage, solution pH, and initial concentration on the adsorption process was investigated. The adsorption isotherm suggested monolayer adsorption of both contaminants over the PPy/Fe3O4/SiO2 nanocomposite following a Langmuir isotherm, with maximum adsorption of 361 and 298 mg.g-1 for CR dye and Cr(VI), respectively. Furthermore, the effect of water type on the adsorption process was examined, indicating the applicability of the PPy/Fe3O4/SiO2 nanocomposite for real sample treatment. Interestingly, the reusability of the nanocomposite for the removal of the studied contaminants was investigated with good results even after six successive cycles. All results make this nanocomposite a promising material for water treatment.

The Application of Nanomaterials for the Electrochemical Detection of Antibiotics: A Review.

Antibiotics can accumulate through food metabolism in the human body which may have a significant effect on human safety and health. It is therefore highly beneficial to establish easy and sensitive approaches for rapid assessment of antibiotic amounts. In the development of next-generation biosensors, nanomaterials (NMs) with outstanding thermal, mechanical, optical, and electrical properties have been identified as one of the most hopeful materials for opening new gates. This study discusses the latest developments in the identification of antibiotics by nanomaterial-constructed biosensors. The construction of biosensors for electrochemical signal-transducing mechanisms has been utilized in various types of nanomaterials, including quantum dots (QDs), metal-organic frameworks (MOFs), magnetic nanoparticles (NPs), metal nanomaterials, and carbon nanomaterials. To provide an outline for future study directions, the existing problems and future opportunities in this area are also included. The current review, therefore, summarizes an in-depth assessment of the nanostructured electrochemical sensing method for residues of antibiotics in different systems.

Clay-Polymer Nanocomposites: Preparations and Utilization for Pollutants Removal.

Nowadays, people over the world face severe water scarcity despite the presence of several water sources. Adsorption is considered as the most efficient technique for the treatment of water containing biological, organic, and inorganic contaminants. For this purpose, materials from various origins (clay minerals, modified clays, zeolites, activated carbon, polymeric resins, etc.) have been considered as adsorbent for contaminants. Despite their cheapness and valuable properties, the use of clay minerals as adsorbent for wastewater treatment is limited due to many factors (low surface area, regeneration, and recovery limit, etc.). However, clay mineral can be used to enhance the performance of polymeric materials. The combination of clay minerals and polymers produces clay-polymers nanocomposites (CPNs) with advanced properties useful for pollutants removal. CPNs received a lot of attention for their efficient removal rate of various organic and inorganic contaminants via flocculation and adsorption ability. Three main classes of CPNs were developed (exfoliated nanocomposites (NCs), intercalated nanocomposites, and phase-separated microcomposites). The improved materials can be explored as novel and cost-effective adsorbents for the removal of organic and inorganic pollutants from water/wastewater. The literature reported the ability of CPNs to remove various pollutants such as bacteria, metals, phenol, tannic acid, pesticides, dyes, etc. CPNs showed higher adsorption capacity and efficient water treatment compared to the individual components. Moreover, CPNs offered better regeneration than clay materials. The present paper summarizes the different types of clay-polymers nanocomposites and their effective removal of different contaminants from water. Based on various criteria, CPNs future as promising adsorbent for water treatment is discussed.